Cylindrical roller manufacturer supplier in China

Needle bearing producer by JnsnBearing: NJ Series – Are single row cylindrical roller bearings and have two fixed ribs on the outer ring and a fixed rib on the inner ring which can guide the shaft in a single direction (axially). NUP Series – Are single row bearing roller cylindrical and have two fixed ribs on the outer ring and, on the inner ring, a fixed rib and a support washer. This way they can be used as locating bearings, guiding the shaft axially in both directions. RNU Series – Are single row cylindrical roller bearings and have two fixed ribs on the outer ring and has no inner ring. Instead, it uses the shaft as the opposing raceway. NAO Series – Radial Needle Roller Bearings that have metric dimensions without ribs, with Inner Rings, and with/without Seals. NKI Series – Needle roller bearings that have metric dimensions, with Inner Rings, cage guided rollers, precision ground raceways with ribs, with/without Seals. NKIS Series – Needle roller bearings that have metric dimensions, larger outside diameter and heavier load capacity (vs. NKI Series), with Inner Rings, cage guided rollers, precision ground raceways with ribs, with/without Seals. RNAO Series – Radial Needle Roller Bearings that have metric dimensions without ribs, without Inner Rings, and with/without Seals. Read extra information on cylindrical roller suppliers.

The correct form and dimensional accuracy of outer ring of drawn cup needle roller bearing is achieved only by press fitting into proper housing with appropriate interference. Therefore, roller inscribed circle diameter is measured after press fitted into a standard ring gauge. Full complement drawn cup needle bearings F type has a drawn outer shell that serves as a raceway for the maximum number of rollers. This combines high radial load-carrying capability with low cost. And this series is ideal for applications where the shaft must be removed for service, which is also easy and convenient for assembly. The drawn cup needle roller bearings are commonly used in transmissions, alternators, A/C compressors, pumps, outboard engines, power tools, tractors, door closers etc.

In order to meet the needs of the design engineers, there are three different materials for the cages—- polyamide, steel and brass. For polyamide cages, it features high elasticity, light weight and quiet running from good damping. Bearings with this cage carry the designation suffix ETN, e.g. NU 205ETN. A pressed steel cage is available for many bearings, mainly as an alternative to the polyamide cage, and such bearings are identified by the designation suffix E, e.g. 310E. As for the brass cage, the advantage includes very high strength, suitable for very high speed, accelerations, high temperature and high endurance limit. The bearing with this cage is identified by the designation suffix EM, e.g. NU 207EM.

Jnsn wholesale bearing suppliers parts at great pricing. Fast free, worldwide shipping. Great warranties. Volume discounts. Technical Drawings. Lowest Pricing. Standard precision bearings generally use stamped steel cages. Extra precision bearings, on the other hand, use cages made from stainless steel, bronze, or phenolic— Cages made from these materials offer higher speeds and better loading capabilities.Precision ball bearings are used for high precision applications in a variety of markets, including aerospace, health, machine tool, robotics and general industry.Precision types of bearing are used in critical aeronautical bearings, guidance system balls for space and military applications, valves, automotive bearings, cosmetics, and other applications where higher precision is required. Read even more details on https://www.jnsnbearing.com/.

Single row deep groove ball bearings 6200 series with a ring groove can simplify the installation technically, as the bearings can be inserted with a locking ring into the housing in the axial direction. The nap rings are used on the outside edge. This saves time and space. The appropriate locking rings can be supplied separately (supplement N) or pre-assembled on the bearing (supplement NR). Both open (unsealed) and steel shields or rubber seals versions of the single-row deep groove ball bearings are available, and they are all pre-lubricated with grease. While many different retainers are available, ball bearings use standard cages of pressed steel, as well as machined, brass cages for high-speed applications. Deep groove radial ball bearings are used to transmit loads from rotating parts to housings with minimum friction loss. This will be obtained by a high hardness, minimizing the deformation of the bearing elements. Additional design measures ensure an undisturbed free rolling action, the measures includes the radial clearance, materials and precision.

JNSN Bearing supplier, manufacturer is specialized in producing different types of bearings, sunch as deep groove ball bearings, self-aligning ball bearings, spherical roller bearings, single row tapered roller bearings, inch tapered bearings, automotive bearings, bearing joints, etc. The annual production capability is more than 960 million units. We have solid teamwork and systematic management to offer one-stop service. We’ll monitor every steps during production, then deliver order timely, and the client just need to wait to receive the items. We’re always here ready to listen to client’s needs and provide economical solutions, suggestions or other helps for the client.

Easy Interchange – Designed as metric bearings, our deep groove ball bearings follow ISO standards and are dimensionally interchangeable with competitor metric products. Premium Lubricants – For reduced torque and a quieter operation, premium lubricant comes standard on all sealed and shielded deep groove ball bearings. This grease has a temperature range from -29℃ to 177℃. Brass Cage Availability – Deep groove ball bearings with brass cages (available in select sizes) can deliver extra strength and durability in the most unrelenting conditions: extreme shock loads, high vibrations and high forces due to acceleration. Quiet Running for Electric Motor Quality – Deep groove ball bearings are frequently used in electric motor applications to minimize vibration and noise.

This 6400 series deep groove ball bearing is rated heavy, making it applicable for usage with heavy radial loads and moderate axial loads. It can be used to a maximum operating temperature of 120 degrees C/248 degrees F. The inner and outer rings and balls are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads, and the sheet steel cage prevents the balls from coming into contact with each other during use, reducing friction, vibration, and noise. It has an open design for lubricating the bearing in place. This deep groove ball bearing series is for usage in various applications such as transmissions, motors, pumps, bicycles, machine tools, generators, textile machinery, agriculture machinery and inline skates, among others.