LEV monitoring company UK
There could be a number of possible reasons why the booth was not being used correctly. Perhaps management and the workforce don’t fully understand the health risks and so don’t appreciate the importance of using the controls properly. Perhaps the workers haven’t been properly trained on how to use the booth. However, there could be a problem with the design of the booth. It is possible that carrying out the work inside the enclosure presents the operator with some practical difficulties. Perhaps the fine work required is difficult to complete properly if the casting is inside the booth or the booth dimensions, particularly the height, could cause the worker to adopt an awkward posture which causes discomfort and could lead to musculoskeletal problems. Solving one problem often creates another. Ergonomics is often neglected when designing engineering controls for chemical hazards. Ideally workers need to be consulted and involved in the specification and design of the controls and its good practice to build and test a prototype before finalising the design. Proper commissioning of the controls should also check for usability.
The Health and Safety Executive (HSE) are the government body responsible for the regulation and enforcement of work related risks to people in the work place. Dust & fume exposure is a key element of the COSHH 2002 (Control of Substances Hazard to Health) regulations setting out exposure limits, preventative guidelines and on going reductions of the contact between people and hazardous gas and particulates. Under COSHH, companies must take steps to prevent, control, maintain and monitor dust and fume exposure in the workplace, as laid out in regulation 9.
According to the HSE, around 13,000 workers in the UK die each year from historic work-related exposure to airborne contaminants at work leading to lung disease and various cancers. These figures are estimated to be attributed to past exposure, primarily to chemical and dust at work.
How Welding Supplies Direct can help ? WE will carry out a thorough tests in line with COSHH Regulation 9 as detailed in HSE Guide HSG258 Our levels of service can be tailored to your Companies needs. However, most clients choose to take advantage of by combining servicing with the LEV testing. Read extra info on https://www.weldingsuppliesdirect.co.uk/welding-equipment/lev-testing.html.
Where employers use or intend to use LEV they must ensure that it is appropriate for the task, installed and operated correctly and subsequently maintained so it continues to operate as when originally installed. Suppliers of LEV can play an important role in helping the employer with the design, installation and maintenance of the equipment. This guidance is therefore intended to help employers and suppliers as well as managers, trade union and employee safety representatives to work together to provide effective LEV so that workers are not breathing in hazardous substances. Different chapters will be more appropriate for different audiences.