2 sided planer provider in China

2 sided planer supplier by V-hold Machinery: The most common application involves gluing a coating (veneer, laminate, composite, PVC etc) onto a substratum (MDF, hardboard, plywood, hollow panels, blockwood etc). The basic configuration of the pressing line is comprised of a feed belt, an automatic press and a discharge deck. This configuration can be completed with numerous options, such as glue spreaders, polishers, automatic feeders, disk, roller or belt conveyors, automatic assembling stations, panel turners and stackers. Lines with various degrees of automation can be supplied right up to fully automatic lines that do not require direct intervention by the operator. Discover additional details on double planer machine.

The compound mitre saw has become a fixture in the work shop because it is versatile and accurate. The mitre saw consists of a powerful circular saw mounted on an arm that hinges at the rear of the tool. When the blade is lowered in a chopping motion, it cuts through the work-piece, passing through a slot in the base. The motor and blade can be pivoted with respect to the base for mitre cuts. It is also possible to tilt the blade too, which is handy for cutting crown mouldings which are set at a pitched angle that must also turn around corners. The diameter of the blade determines the maximum cut width. Most models have variable speeds, but the jigsaw is designed to cut precisely not quickly. Feed the wood to the saw flush to the saw table. Jigsaw blades are thin and easily broken, so take care not to bend, twist, or put too much pressure on them. Drill holes in the waste wood at the tightest corners to help you achieve a clean and neat cut. The depth of the saw throat determines how large a piece of wood can be cut on a given saw.

Up-acting machines can limit staged bending because of the possibility of ram tilt, staged bending may not be a viable option on an up-acting machine. Because staged bending utilises multiple stations on one machine, if any of the stations on an up-acting machine are too far from the centre, ram tilt may result. Hydraulic presses come in many different forms and are used in many different industries. The basic structure to all presses is a heavy-duty main frame with hydraulic cylinders. The number of cylinders are dependent on the pressure requirement. They are operated by a hydraulic power pack. The presses can be manufactured with heated or cold platens and can have conveyors fitted to make the presses automated.

Sanding is the operation of finishing wooden items after they have been machined. Essentially, a sanding machine performs a sand papering job to produce a uniformly sanded surface. Three common types of sanding machines are : Belt sander; Spindle sander; Disc sander. It has an endless cloth backed abrasive belt which runs over two drums and is used for sanding and shaping flat surfaces. One of the drums is rotated by an electric motor and serves as the driver, while the other supports the belt and keeps it in proper tension. For sanding work by the abrasive belt, the the workpiece is supported by an adjustable table that may be tilted to any desired angle.

Probably the second most important of single woodworking machines in a carpentry shop is the circular saw. It can be used for ripping, cross cutting, mitering, beveling, rabbeting, and grooving. Although there are many types of circular saws such as universal saw, variety saw, bench saw, the basic working parts are common to all. Each has a flat surface or table upon which the work rests while being cut, a circular cutting blade, cut-off guide, and a ripping fence that acts as a guide while sawing along the grains of the wood. The circular saw usually has provisions for tilting the table upto an angle of 45° to enable the machine to cut at different angles required during mitering, levelling, etc. The size of a circular saw is determined by the diameter of the saw blade.

A drill press is simply a fixed in place version of a hand drill, it’s great for precise work. With an adjustable table beneath the chuck with a hole in its centre, a spinning drill bit can pass cleanly through a work-piece. Drill presses come as either freestanding floor models or for worktops. The drill press is powered by an electric motor, driving it via a system of pulleys or gears. The drill bit is locked into the chuck, then driven down using a hand powered lever system, and a spring pushes it back up when pressure on the lever is released. A number of adjustments including a moveable table depth, a depth gauge to set the distance the spindle travels and pulley adjustments to change speeds increases the tools functionality. Discover even more info on v-holdmachinery.com.

Founded in 1996, V-HOLD have more than 20 years of professional four-sided plane production, to create China’s four-sided plane first brand and commits itself to provide the most secure, reliable, efficient, energy-saving, economical production equipment for the customers around the world. Nowadays, most of the products including 4-Side Moulder, Multiple Rip Saw, Multiple Rip Saw with Double Side Planner, and Automotive Floor Production Line have passed ISO9001: 2000 quality system.