Custom bearing manufacturer in China
Bearing factory by Wxingbearing? Released on December 20, 1984 of the People’s Republic of China machinery industry standard: JB / 2300-84 the rotary bearing type, basic parameters and technical requirements, composed mainly of machinery and electronics industry of tianjin engineering machinery research institute, xuzhou hering slewing bearing factory is responsible for drafting, the country then issued standard of construction machinery in 1991: JB36.1-36.3-91, released in 1999 and 2011 successively new machinery industry standard JB / 2300-1999 and JB / 2300-2011. Slewing bearing, is a kind of comprehensive load to bear a large bearings, can withstand the larger axial and radial load and tilting moment. Discover extra details at custom bearing manufacturer.
As the surrounding parts of the bearing, in the use of necessary screw support unit, nut bearing, lock nut and so on also has been standardized, for the user to choose to use. Ball screw pair based on the accumulated over the years products technology, from material, hot outside, the manufacture, inspection and shipment, are based on the rigorous quality assurance system to manage, therefore has a high reliability. (1) double push a free way?The screw end fixed end free.The fixed end bearing under axial force and radial force at the same time.This way of bearing used for small short screw. (2) double push a supporting way?Screw at one end is fixed at the other end bearing.The fixed end bearing under the axial force and radial force at the same time?Bearing end bearing only bear radial force?And can trace the axial float can avoid or reduce the screw by gravity bending.At the same time, screw elongation thermal deformation can freely to the end.
Oilless bearing is a kind of both metal bearing characteristics and bearing characteristics of novel lubrication bearing lubrication system, the load matrix, and the special formula of solid lubricating materials lubrication.It has high bearing capacity, impact resistance, high temperature resistant, self-lubricating ability etc., especially suitable for overloading, low-speed, reciprocating or swing, difficult to lubrication and oil film formation, not afraid of the water and other acid erosion and erosion.
Entity one-way bearing used GCr15 bearing steel, after heat treatment hardness in HRC61-65, bearing small volume and high bearing capacity, have enough storage space of the grease, but have long come lubrication interval. Powder metallurgy one-way bearing and the real driving force to the shaft in one-way bearings can be completely when the “lock”, to avoid the traditional stamping outer ring one-way bearing “lock” the problem of insufficient performance. Main use: textile machinery;Printing machinery;The automotive industry;Household appliances;Self-checkout counters. HF series: one-way needle bearing is composed of stamping outer ring and plastic cage, cage can bring plastic reed can also on stainless steel reed guided needle, cant on the outer ring raceway and roller as a locking device.HFL (clutch and bearing components) : support bearing installed at both sides of the needle roller clutch and bear radial load, as a support bearing is needle and plastic cage components.Since there is no inner ring, wear of shaft is bigger, so the use of shaft is best for heat treatment. Find even more info at wxingbearing.com.
Thrust spherical roller bearings and spherical roller bearing,the same seat ring raceway surface is consistent with the bearing center shaft point as the center of the sphere,the roller of these bearings are of spherical shape,therefore,has the automatic regulating cardiac function,are not sensitive to coaxial degree and axis deflection.Compared with cylindrical roller thrust bearing,large carring capacity,relative sliding is small,but limit rotatinaol speed is low.
This is definitely a challenge for the machinery industry. However, this challenge was solved in the early 1960s. The British experts in related fields successfully developed oil-free bearings, that is, self-lubricating bearings, which perfectly solved the problem of bearing oil leakage. And self-lubricating bearings were successfully put into high-end machinery manufacturing fields such as aerospace in the late 1960s. Since its development, self-lubricating bearings have become an indispensable existence in many high-end fields.
Fracture is mainly due to the hot and bearing ring end face with sliding friction between parts, under the action of axial force, frictional heat, producing the end face burned with color changing conditions, such as friction and heat that causes bearing ring end face crack, crack characteristics is perpendicular to the direction of friction work, also transverse crack of cross section thickness thinner (thickness of section < 12 mm) had a greater influence on the inner ring, especially overloaded high or medium speed mill roller bearing. Here, we should pay attention to the fatigue fracture and overload fracture of bearing rings may occur at the same time, especially for bearings with poor service conditions (such as 22328, etc.).The research on the phenomenon of ring fracture should not only consider from the point of view of the defects produced in the material and production process, but also study and analyze the structural size of bearing parts, processing measurement means, processing technology, bearing service conditions and other factors.