Best rated turbine mass flow meter factory

Turbine mass flow meter supplier from China: A mass flow meter may require more frequent maintenance, such as cleaning and calibration, than a magnetic flow meter. A magnetic flow meter, on the other hand, requires relatively little maintenance, because it has no moving parts and is not affected by wear and tear. Measurement Principle: As mentioned above, mass flow meters measure the mass of the fluid in order to determine the flow rate. While magnetic flow meters use magnetic fields to measure the flow of conductive fluids. Find additional details at turbine flow meter manufacturer.

Influence of humidity on measurement results when using vortex meter. The output of the vortex flowmeter is only proportional to the flow velocity of the fluid flowing through the measuring tube. When measuring wet saturated steam, the influence of water droplets on the output of the turbine flow meter is negligible, so it can be considered that the output of the turbine flow meter is entirely caused by the wet flow. Caused by the dry part of the steam. The density of the dry part, whether it is pressure compensation or temperature compensation, can be detected more accurately. The results of steam measurement are often used as the basis for economic settlement between the supply and demand sides. If the two parties agree to settle the fee according to the dry part of the steam and no charge for the condensed water, the impact of the phase change on the measurement is negligible and can be ignored.

The selection of gas turbine flowmeters is a difficult task for many people. In fact, as long as the relevant precautions are mastered, the selection of gas turbine flowmeters will become very simple. Fully understand the qualifications and performance of gas turbine flow meter suppliers. When purchasing gas turbine flowmeters, imported brands are basically familiar to everyone. However, when purchasing domestic brands, it is necessary to fully understand the qualifications and performance of suppliers. You can get a first-hand account of it by visiting it in person or by asking people who have used the brand before. It is recommended to use brands with high reputation in China, good user reputation and outstanding performance as much as possible.

Turbine Flow Meter has the characteristics of high accuracy, good repeatability, convenient installation and maintenance, and simple structure. Liquid flows through the turbine casing, causing the internal rotor to rotate. When the rotor rotates, an electrical signal is generated in the pickup coil. This signal is converted to engineering units (liters, cubic meters, gallons, etc.) on the applicable local display. Optional accessory modules can be used to export signals to other devices. Make sure the vortex flow meter model meets your specific needs. For your future reference, if this information becomes unreadable on the turbine, it may be useful to record it on the nameplate of the manual. See the nameplate for your custom product specifications. Find extra info at https://www.bjssae.com/.

Beijing Sincerity Automatic Equipment Co., Ltd was reformed from the Petrochemical Branch Automatic Equipment Co.,Ltd. Beijing Sincerity is the innovation developed enterprise invested by both the China Petroleum &Chemical Corporation’s Beijing Research Institute of Chemical Industries and the Capital Science and Technology Group. Please be noticed, that all the videos taken are approved by SGS, Switzerland, or TUV, Germany. All the videos are real and without shooting skills or beauty filters.

Install the total steam flow meter before the pressure reducing valve. Since the above-mentioned steam has not been decompressed, there is no phase change problem, so install the flowmeter before the pressure reducing valve, and use the saturated steam compensation method to ensure the measurement Accuracy. If the flowmeter can only be installed behind the pressure reducing valve, a pressure transmitter can be added for temperature and pressure compensation. If the stability of the pressure reducing valve is good, the upstream pressure value of the flowmeter can be set as a constant value in the display instrument for temperature and pressure compensation.

American first unit of coriolis mass flow meter entered China SINCE 1987. Beijing Sincerity belongs to the state owned enterprise, which is Beijing institute of chemical industry, SINOPEC automation instrument department. SINOPEC has invested large amount of money to ask Beijing Sincerity to develop the VERY FIRST Chinese domestic coriolis mass flow meter since 1987. Chinese very first unit of U shape coriolis mass flow meter was successfully developed by Beijing Sincerity Group. Beijing Sincerity won the National Science and Technology progress awards. – SINCER 1989.