Septic maintenance high quality provider in Sonora, California

Sonora, CA best septic maintenance services? Repair leaky faucets. Water that is wasted through leaky taps puts a strain on your septic tank system (not to mention, it also increases your water bill!). Be sure to repair leaky tap right away. Don’t pour household chemicals down the drain. Dispose of motor oil, antifreeze, paint, pesticides and potent cleaners properly. They should never be poured down the drain because they kill bacteria that breaks down solids in your septic tank.

A typical septic system has four main components: a pipe from the home, a septic tank, a drainfield (also known as a leachfield), and the soil. The septic tank is a watertight box, typically buried beneath the ground, usually made of concrete, fiberglass, or polyethylene with an inlet and outlet pipe. Wastewater flows from the home to the septic tank through the sewer pipe. Sludge (solids) and scum (oil and grease) stay in the tank while the treated wastewater (known as effluent) is released.

Foothill Sanitary Septic; driven by our philosophy to never waver in our integrity and honesty and commitment to provide outstanding workman ship, will not perform an inspection without pumping the tank first. The cost of a tank replacement could range between $4,500 to $8,000, so we make sure the job is performed correctly. If we can’t provide a complete evaluation, it is not reasonable or proper to do so. We inspect for signs of any inflow and infiltration. All tanks, risers, inlets and outlets must be water tight as per code. Firstly, if a tank is not water tight, waste water can leave the tank and go straight into the ground without any treatment. Secondly, if waste water can go out, then ground water can come in (this is what is known as I&I). Read extra info at septic services in valley springs ca.

To keep your septic tank and drain field in working order, having the tank pumped on a regular basis is essential. How often you will need to have your system pumped depends on the size of your household, total wastewater generated, the number of solids, and the size of your tank. The official EPA recommendation is that you have the system pumped every 3-5 years, but it’s a good idea to have it inspected and serviced more often than that. In addition to regular tank pumping, the most important thing you can do for your septic system is to be careful about what goes into it.

Save money by renting a backhoe and installing your own septic system! Stamped, engineered, septic system plans are typically not necessary unless your property percolation test was extreme (greater than 60 minutes per inch or less than 5 minutes per inch); or the site has seasonal groundwater; or there is bedrock or unsuitable soil less than four feet below the proposed leach field; or if the ground slope is in excess of 30% in the area of the proposed leach field. Engineered systems require a local professional engineer to approve (stamp) your site’s septic tank and leach field plans.

Kevin Gause is the owner of Foothill Sanitary Septic and Operation Manager for Foothill Portable Toilets which is owned by Leslie Gause. Kevin has over 20 years experience in solid and liquid waste transporting and 17 years experience in handling all aspects of septic, grease and portable toilet services. Kevin’s commitment is to provide all services with the utmost integrity and honesty. By providing quality workmanship and performing the job the way it should be done, customer satisfaction is achieved. Our first-time customers continually become our long term customers time and time again, choosing us for all their septic and portable toilet needs. This commitment is prevalent throughout the company.

A Dosing System introduces the effluent waste water from the septic tank to the drain field in intermittent intervals (doses) throughout the day. This allows the soil to absorb the “dosed” water in the drain field before more water is introduced. These types of systems are used in soils with poor absorption rates or shallow soils. There are two common types of dosing systems: The Siphon Dose and the Low Pressure Dose. A siphon dose system (not pictured) does not use an electrical discharge pump. It uses a siphon bell ( an inverted bell that is open on the bottom and traps air) that cycles as the water level rises and cause the effluent to dose into the drain field by a siphon action (Click on the link to the left to see how it actually works). A low pressure dosing system uses a pump in a pump chamber (as shown in picture on the left). The pump turns on intermittently through electronic controls and sends the effluent to the drain field in intervals throughout the day. Find even more details at this website.