Several advices on how to maintain your hot tub

Here are some tips about how to maintain your hot tub and also a suggestion if you live in Colorado. Turn your filtration cycle down. Your Arctic comes programmed for two four-hour cycles twice a day. If you don’t use your spa much, try two or three hours, and if you have an off-peak discount, set your filter cycles to come on during that period. But take care – proper filtration is necessary to maintain water quality.

Your daily maintenance tasks are all about ensuring good water quality. In a hot tub that means checking two things: PH and sanitizer levels. This is easy stuff, and can generally be accomplished by dipping a single, color-coded test strip into the water to check that everything is as it should be. If you’re diligent about maintaining your tub, most days this won’t mean doing anything more than walking out to your tub, dipping the test stick in the water, and heading back inside. If your PH or sanitizer levels need adjusting, however, you’ll need take an extra few minutes to dump the proper additive into your water to get things back their proper levels. Doing so will prevent a host of problems, including scaling, mineral buildup, corrosion, skin irritation, and cloudy and stinky water.

Tips for purchasing a hot tub : Acrylic is the most common spa shell material, but roto-cast polymer, vinyl and wood are also options. The spa shell not only determines the look of the hot tub, but also its cost, insulation, and strength. Considering a wooden hot tub? Read more about wood tubs before you take the plunge.

This spa care tip is so often forgotten. However, if the skimmer starts to suck air, it could possibly damage the pump. The water level should be in the middle of the skimmer intake or a little higher. You don’t want it too high, and you never want to overflow the spa, so keep a close eye on the water level while filling.

If your spa filter has a pressure gauge attached to it, the cartridge needs cleaned when the pressure rises 8-10 PSI higher than the freshly cleaned pressure reading, or when flow is noticeably reduced. If you have no gauge on your filter, you should clean the filter on a regular schedule. Spa and Hot Tub CareI clean my own filter cartridge every 4-8 weeks, depending on how often I use the spa. If my hot tub is being used a few times per week, I’ll clean the filter every four weeks, or monthly. See more details on Do you have to repair your hot tub ?.