Valley Springs, California septic inspections services
Arnold, California septic inspections services? Foothill Sanitary Septic; driven by our philosophy to never waver in our integrity and honesty and commitment to provide outstanding workman ship, will not perform an inspection without pumping the tank first. The cost of a tank replacement could range between $4,500 to $8,000, so we make sure the job is performed correctly. If we can’t provide a complete evaluation, it is not reasonable or proper to do so. We inspect for signs of any inflow and infiltration. All tanks, risers, inlets and outlets must be water tight as per code. Firstly, if a tank is not water tight, waste water can leave the tank and go straight into the ground without any treatment. Secondly, if waste water can go out, then ground water can come in (this is what is known as I&I).
Pump your septic tank. Most septic tanks need to be pumped every 3-5 years. The frequency depends on how many people are in your home. The more people living in your house, the more often you should pump your septic tank. Take care of your drain field. Make sure all water is diverted away from your soakage area. Additionally, only landscape your soakage area with grass. If you want to add plants, be sure to only pick ones with shallow root systems. Finally, never park a vehicle on top of your soakage area. Vehicles can put a strain on your soakage area and may lead to ruptured pipes.
The most common cause of a failed system is overloading it. This can be caused by the consecutive use of high-volume activities such as laundry, showering, and running the dishwasher. Space out their usage as well as follow water conservation efforts year round. This is particularly important during heavy rain, which can quickly overwhelm a drainfield on its own. Also common are blockages, which can cause pipes to be clogged and the drainfield to overflow. To prevent this, avoid flushing anything besides the three Ps (pee, poop, and toilet paper). “Flushable” wipes and FOG (fats, oils, grease) clog pipes so should be thrown in the trash. Avoid the use of a garbage disposal which can improperly break down debris.
A Sand Filter System uses a bed of sand between the septic tank and the drain field. Sand filters have been used where conventional septic tank/absorption field systems have failed. They are a good option for sites with high groundwater, shallow bedrock, poor soils, or other restrictions. A typical sand filter is a line watertight box filled with sand. The effluent from the septic tank is introduced into the sand bed uniformly through controlled doses through a network of distribution pipes placed in a gravel bed located above the sand filter. As water trickles through the sand bed, it is filtered and collected at the bottom. The sand bed also is a biological filter using micro-organisms to decompose the waste water (a type of aerobic system) This water is then sent to the soil absorption field either through standard gravity or a pump system. The discharge pump chamber may be located in the sand filter. See more info at types of septic system.
What Is a Septic System? A septic system is an on-site sewage treatment and disposal system that is usually buried underground. Septic systems consist of two main parts: a septic tank and a drain field. The septic tank is a watertight box, usually made of concrete or fiberglass, with an inlet and outlet pipe. All wastewater flows from the home to the septic tank through the sewer pipe. Septic tanks take wastewater and separate solid matter from it, which settles at the bottom of the septic tank. Once in the septic tank, heavy solids sink to the bottom, and bacteria reduces them to sludge and gases.
We at Foothill Sanitary and Foothill Portable’s “Stand” for our Flag and kneel for our fallen. My family has a very strong military background with family members serving in every branch of the military. This is why we at Foothill Sanitary and Foothill Portable’s offer a 5% Military discount to all of our vet’s as a small way to say Thank you for “your” service. My motto is from the branch that I served in “Semper Fidelis” meaning always faithful, a motto that we will bring to you.
Slower percolation rates due to poorly draining soil with clay, bedrock, high ground water, proximity to a creek, or other complications require larger leach fields. There are two methods of calculating the minimum absorption area for a leach field. Traditionally, you dig an eight foot deep test inspection hole in the area of the intended leach field to allow building inspector, or your local engineer, to physically examine the soil and determine its Long Term Acceptance Rate. Or you can have a local soil testing firm perform a percolation test to clock the speed of your soil’s capacity to absorb liquids. Find even more information at here.