Custom alloy wheels wholesale manufacturer by jjjwheel.com
Alloy rims manufacturer and supplier by jjjwheel.com? Due to the current modification of the shops, the original thought that the hub installation of So easy if you do not pay attention to the following installation details, or out of the control: No diameter reducer is installed: the vehicle may have jitters problem during daily running. Dynamic balance weight does not return to zero: when the vehicle is running at high speed, it may shake. No torque plate is used to tighten the hub manually: too loose the hub may be in danger of falling off, too tight may damage the nut/bolt. Tire specifications do not match the hub: tire wear is abnormal, and even the hub can not be installed or there is a rub problem. See even more information on custom alloy wheels.
Gravity casting wheels:This is the most primitive processing method for aluminum alloy wheels, which can be formed by pouring high-temperature liquid metal into the mold and cooling it. This method is efficient and low cost, but the uniformity of each part of the manufactured wheel is poor, and the molecular density is relatively low, resulting in low strength, so it is not very suitable for high-strength use of passenger vehicles.
To sum up, it can be concluded that aluminum wheels are the product of “high-speed”, “energy-saving” and “modern fashion” of automobiles. With the rapid development and development of the automobile market, aluminum wheels are used to gradually replace the traditional steel ring. The trend has become more and more intense, and there is an infinitely broad market prospect. Many people usually choose a wheel that is larger than the original product when buying a new wheel. The first thing to pay attention to is that the tire and the wheel are two inseparable parts. During the modification process, try to keep the extension diameter of the tire. It is necessary to remain unchanged or to keep the changes as small as possible. One of the main reasons is that if the deviation is too large, the accuracy of the meter will be problematic. It’s not feasible to just increase the wheel size without changing the tires. For example, if the tire size of the original car is 215/60R16 (16 means 16-inch wheels), then if you change to 17-inch wheels, the new tire size should preferably be 225/55R17, or 225/50R17.
If the price of the car is not much different from that of the fuel car, you can choose it, but from the perspective of the current market models, the general car price is more than 20,000 higher than the fuel car of the same level. If you consider the economic cost, it is not recommended to choose a fuel-electric hybrid verb: move. Plug-in hybrid models, the battery life is generally less than 100 kilometers, and the fuel is used when the battery life is exhausted. The price of the car is also much higher than that of the same-level fuel car, but like pure electric vehicles, you can enjoy the green card treatment, only Considering the economic cost, it is also recommended that the higher car price is far more than the extra money for fuel.
The advantages of alloy wheels are light weight, high manufacturing precision, high strength, low inertial resistance, strong heat dissipation capacity, good visual effects, etc. The disadvantage is that the manufacturing process is complicated and the cost is high. The aluminum wheel hub is the product of “lightweight”, “high speed” and “modernization”, because it has many characteristics that are unmatched by steel wheels: Light weight and obvious energy-saving effect: It is well known that reducing the weight of the vehicle can save fuel, and the wheels located in the driving part with the lowest center of gravity of the vehicle are even more important to reflect the energy-saving effect of the vehicle.
Our products(such as forged wheels) are all manufactured according to the strictest international standards. Our products have received favor from both domestic and foreign markets. They are now widely exporting to all over the world. If you are looking for a custom alloy wheel manufacturers, JWHEEL is your best choice, as one of the best alloy rims manufacturers. We have formed a complete testing system from the incoming inspection of raw materials to the factory inspection of finished products, and our testing capabilities range from material and performance to dimensional and impact and fatigue testing, and then to the testing of the coating performance of finished wheels. See extra info on https://www.jjjwheel.com/.