High quality fuel tank sealer and brake caliper paint online store
Top self etch primer and rust remover online shopping by por15.com? POR-15 Metal Prep provides the best adhesion for POR-15 Rust Preventive Coating on any metal surface, including aluminum and shiny polished metal surfaces. Our simple process gently etches metal, creating an ideal anchor pattern for coatings such as POR-15 Rust Preventive Coating, while simultaneously leaving a zinc phosphate coating to insure chemical bonding of paint and steel. Avoid other preps that may leave harmful residues which prevent proper adhesion. After thoroughly degreasing your work piece, apply environmentally safe POR-15 Metal Prep to both neutralize any rust and etch any clean bare metal. This will allow better adhesion of POR-15 Rust Preventive Coating or any other coating. POR-15 Metal Prep is not caustic, corrosive, toxic or flammable.
POR-15 Alloy Prep Soft Metal Etching Rust Neutralizer (formerly AP-120 Metal Prep) is designed exclusively for use with our 2K Urethane Clear, Alloy Prep guarantees perfect adhesion of 2K Urethane to any metal surface, especially chrome or polished aluminum, where good adhesion is often difficult to achieve and where other solutions may discolor. Alloy Prep is non-flammable with no noxious fumes. Wear rubber or latex gloves when using.
POR-15 Caliper Paint is formulated for high heat performance applications. When properly applied POR-15 Caliper Paint will provide a tough and attractive coating that will satisfy even the most demanding car enthusiast. POR-15 Caliper Paint has excellent coverage properties, 5 brilliant ceramic-like colors, and withstands temperatures up to 350°F. Also available in the POR-15 Caliper Painting Kit. The kit contains the proper preparation products and accessories for painting calipers. Great for do-it-yourselfers and first time users. Discover extra details on caliper paint.
Mask off the areas not to be painted. Tape off the brake bleeder screw, brake lines, and caliper piston boots and anything else you don’t want painted. Open the small can of POR-15 Rust Preventive Coating and stir, making sure the contents are thoroughly mixed. Using a foam brush (included in your kit) paint the caliper evenly, making sure the coating is evenly applied but not to the point where the paint runs. Because this is a rust preventive coating you want to be sure you don’t miss any spots which could rust later if not covered.
Rust conversion products claim to change the chemical nature of rust and convert it to a more stable element that won’t rust again. History of the failure of these products is well documented; most simply don’t work for more than a few months at best, and they are subject to the same chipping and cracking that occurs with ordinary rust coatings. POR-15 works because it chemically bonds to rusted metal and forms a rock- hard, non-porous coating that won’t crack, chip, or peel. It keeps moisture away from metal with a coating that is strengthened by continued exposure to moisture. Read additional info at por15.com.